BLKYM - PAINT, OIL, EXTERIOR, CONCRETE
- MSDS: BLKYM
- Manufacturer: BAKER SEALANTS AND COATINGS CO INC
- Product Name: PAINT, OIL, EXTERIOR, CONCRETE
- National Stock Number: 8010-00-584-3336
Product Identification
Product ID:PAINT, OIL, EXTERIOR, CONCRETE
MSDS Date:11/13/1990
FSC:8010
NIIN:00-584-3336
MSDS Number: BLKYM
Responsible Party
JERSEY CITY, NJ 07304
US
Emergency Phone: 201-333-6986/800-356-3129 CHEMTREC
Info Phone: 201-333-6986
Preparer: CHARLES FRIEDMAN
Cage: 34094
Contractor
Telephone: 201-437-6501
Cage: 33150
Ingredients
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 26.0%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 26.0%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
RAW LINSEED OIL
CAS: 8001-26-1
RTECS: OI9690000
Fraction By Weight: 12.0%
CARBON BLACK
CAS: 7440-44-0
RTECS: FF5250000
Fraction By Weight: 4.0%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
MINERAL SPIRITS
CAS: 8056-41-3
Fraction By Weight: 13.0%
ACGIH TLV: 500 PPM
192
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE IRRITATION. SKIN: CAN
CAUSE DEFATTING. INHALATION: CAN RESULT IN HEADACHE AND DIZZINESS.
INGESTION: CAN CAUSE NAUSEA.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYES: FLUSH WITH COOL RUNNING WATER FOR 15 MINS. SEE A
PHYSICIAN. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER.
INHALATION: PROVIDE FRESH AIR AND REST. INGESTION: DO NOT INDUCE
VOMITING. DRINK ONE OR TWO GLASSES OF WATER TO DILUTE.
Fire Fighting
Flash Point Method:TCC
Flash Point:110F,43C
Lower Limits:0.8
Upper Limits:5.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS TO AVOID INHALATION OF SMOKE OR VAPORS. DO NOT
USE WATER.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS AND OPEN FLAMES. VAPORS FORM EXPLOSIVE MIXTURE BETWEEN UPPER
AND LOWER EXPLOSIVE UNITS.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
IGNITION. PICK UP SPILL IMMEDIATELY WITH INERT ABSORBENT(S) AND
NON-SPARKING TOOLS. SAFELY DISPOSE OF SATURATED ABSORBENT(S) BY
IMMERSING IN WATER. WEAR PROTECTIV E EQUIPMENT DURING CLEANUP.
Handling
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. KEEP
CONTAINERS AWAY FROM ANY SOURCE OF IGNITION.
Exposure Controls
Respiratory Protection:ORGANIC CANISTER MASK OR AIR PACK IF VENTILATION
IS INADEQUATE.
Ventilation:LOCAL: IS RECOMMENDED. MECHANICAL: WITH APPROVED CL D
EXPLOSION PROOF MOTOR AND SWITCHES.
Protective Gloves:NEOPRENE RUBBER GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:3.1 MM@68F
Vapor Density:3.9
Spec Gravity:1.46
Viscosity:89-104
Evaporation Rate & Reference:0.12 (BUAC = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK COLOR, PETROLEUM
Percent Volatiles by Volume:25.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES, OXIDIZING AGENTS AND SELECTED AMINES.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DISPOSAL METHODS MUST COMPLY WITH ALL STATE,
LOCAL AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.